Timer Operation - Fujitsu AST7USACW Operating Manual

TIMER OPERATION

To Use the OFF TIMER
Press the START/STOP button (Fig. 6 S)
1
(if the unit is already operating, proceed to step 2).
The Indoor Unit's OPERATION Indicator Lamp (red) (Fig. 3 5) will light.
Press OFF TIMER button (Fig. 6 N) to select the de-
2
sired times.
Press OFF TIMER button to change from temperature setting to timer dis-
play.
Each time the button is pressed, the time changes in the following order:
Set the time while the OFF TIMER mark (
unit's display is flashing. (The flashing will continue for about 30 sec-
onds)
Press SET button (Fig. 6 P) to select OFF TIMER op-
3
eration.
The OFF Timer Mark (
display.
The Indoor Unit TIMER Indicator Lamp (green) will light.
It can not be used during ON TIMER operation.
To Use the ON TIMER
Press the START/STOP button (Fig. 6 S)
1
(if the unit is already operating, proceed to step 2).
The Indoor Unit's OPERATION Indicator Lamp (red) (Fig. 3 5) will light.
Press ON TIMER button (Fig. 6 O) to set the expected
2
time.
If ON TIMER button is pressed, it will be changed into time display from
temperature setting display.
Each time the button is pressed, the time time changes in the following
order:
Set the time while the ON TIMER mark (
display is flashing.(The flashing will continue for about 30 seconds)
Press SET button (Fig. 6 P) to select ON TIMER opera-
3
tion.
The ON Timer mark (
play.
The Indoor Unit Timer Indicator Lamp(green) Will light.
It can not be used during OFF TIMER operation.
) on the remote control
) will be shown on the remote control unit's
)on the remote control unit's
)will be shown on the remote control unit's dis-
To Cancel the Timer
Press the CANCEL TIMER button.
To Change the Timer Settings
Press the ON TIMER button/OFF TIMER
button as required. Perform Use TIMER
step 2 and 3.
To Stop Air Conditioner Operation
while the Timer is Operating
Press the START/STOP button.
To Change Operating Conditions
If you wish to change the operating
conditions (Mode, Fan Speed, Thermostat
Setting), after making the timer setting,
wait until the entire display reappears, then
press the appropriate buttons to change to
the desired operating condition.
To Cancel the Timer
Press the CANCEL TIMER button.
To Change the Timer Settings
Press the ON TIMER button/OFF TIMER
button as required. Perform Use TIMER
step 2 and 3.
To Stop Air Conditioner Operation
while the Timer is Operating
Press the START/STOP button.
To Change Operating Conditions
If you wish to change operating conditions
(Mode, Fan Speed, Thermostat Setting),
after making the timer setting wait until the
entire display reappears, then press the
appropriate buttons to change the operat-
ing condition desired.
8