Tv Features; Streamtv™ Internet - Mitsubishi Electric 740 Series Owner's Manual

TV Features

StreamTV™ Internet
About StreamTV
740 and 840 Series, U.S. only
Internet services let you access many popular on-line
applications providing both free and paid content.
Required for StreamTV internet media:
• Broadband internet service (at least 2 Mbps for SD,
4 Mbps for HD, and 8 Mbps for 1080p HDX)
• Category-5 Ethernet cable or a wireless router
transmitting to an AzureWave AW-NU231 USB wire-
less adapter.
• Computer access to the websites of content provid-
ers when initial account activation is required for
service.
• A credit card to cover the cost of paid content.
WD-82CB1 (Canada)
StreamTV internet services are unavailable in Canada.
Canadian users can, however, receive software updates
and use the iPhone remote control app noted on page
6. Follow the instructions on these pages to connect
the TV to your home internet network.
Home Network Setup
Before using StreamTV internet media, you must
connect the TV to the internet using either an Ethernet
cable or a wireless connection as described here.
Note: 840 Series. Make sure the TV is on any input
other than Bluetooth ® . Press the INPUT key to
change.
Wired Ethernet Connection
DHCP (automatic)
1.
Connect the TV to your network router with a Cat-
egory-5 Ethernet cable (not supplied).
EXTERNAL
CONTROLLER
INPUT
CENTER
HDMI
2
1 3 4
TV Panel
Router or modem
Incoming
providing high-speed
internet
internet service
cable
AUDIO/SURROUND
-OUTPUT- L
R
DIGITAL
AUDIO
OUTPUT
SUB WOOFER
L
INPUT OUTPUT
LAN
3D
ANT
GLASSES
USB-P LAN LAN
EMITTER
R
Ethernet
cable
2.
Open the Setup > Network menu to review set-
tings.
Setup > Network, DHCP connection
3.
Press EXIT
to clear the menu.
Manual
Note: Manual setup is available only for a wired con-
nection.
1.
Connect the TV to your network router with a Cat-
egory-5 Ethernet cable (not supplied).
2.
In the Setup > Network menu, highlight Manual
and press ENTER .
3.
Press to move to the Connection Data area.
4.
Input the connection data.
5.
After entering connection data, press ENTER to
connect.
6.
Change any of the following if needed:
• Default Gateway
• DNS
• Subnet Mask
For assistance call 1(800) 332-2119
17