Samsung Refrigerator User Manual page 15

1. Pull out the freezer drawer ( 1 ) to reveal the
lower hinge ( 2 ).
2. Insert the supplied allen wrench (5/32" (4 mm))
( 3 ) into the shaft ( 4 ) of the lower hinge.
3. Adjust the height by turning the hex wrench
( 3 ) clockwise (
DOWN
( ).
UP
(2)
(4)
(1)
When you turn the hex wrench counter-
clockwise (
4. After adjusting the doors, insert the supplied
fastener ( 6 ) using a pliers ( 5 ) in the gap
between the hinge-grommet ( 7 ) and the lower
hinge ( 8 ).
The number of fasteners you'll need to insert
depends on the gap.
2 fastener are enclosed with the
refrigerator.
The thickness of each fastener is 0.04".
WARNING
• Keep the fasteners used to level the refrigerator
doors out of the reach of children.
Do not let children play with them.
- There is a risk of death from suffocation if a
child swallows a fastener.
DA68-03029A-01.indb 15
) or counter clockwise
(3)
(3)
), the door will move up.
English - 15
MAKING MINOR ADJUSTMENTS
BETWEEN OUT DOOR AND IN
DOOR
After raising the out door, insert the supplied SHIM
HINGE MIDDLE in the gap between the OUT
DOOR and the HINGE-SHAFT.
SHIM HINGE MIDDLE are enclosed with
the refrigerator.
The thickness of RING is 0.04" (1 mm).
CAUTION
Keep the Rings out of the reach of children and
make sure that children do not play with them or
put them into their mouths.
2014. 3. 19. 9:24