Connecting Your Devices - Hitachi CP-X253 User Manual

Setting up

Connecting your devices

Be sure to read the manuals for devices before connecting them to the projector.
Make sure that all the devices are suitable to be connected with this product, and
prepare the cables required to connect.
Please refer to the following illustrations to connect them.
VCR/DVD player
AUDIO OUT
L
AUDIO OUT
L
AUDIO OUT
L
NOTE  The COMPUTER IN1 port can support a component signal also.
For more information, please see the description of the COMPUTER IN item of
the INPUT menu (29).
 Please use the enclosed Video/Audio cable and Audio adapter.
WARNING ►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION ►Turn off all devices and unplug their power cords prior to
connecting them to projector. Connecting a live device to the projector may
generate extremely loud noises or other abnormalities that may result in
malfunction or damage to the device and the projector.
►Use appropriate accessory or otherwise designed cables. Ask your dealer
about non-accessory cables which may have to be of a specific length or
equipped with a core. For cables with a core only at one end, connect the end
with the core to the projector.
►Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the projector.
8
COMPONENT
R C /P C /P Y
R R B B
RGB OUT
S-VIDEO OUT
R
VIDEO OUT
R
S-VIDEO
VIDEO
PC
USB-A AUDIO
RS-232C
RGB OUT
OUT
or
COMPUTER IN1 COMPUTER IN2
K
MONITOR OUT CONTROL
Monitor Speakers
AUDIO AUDIO
RGB IN
OUT
AUDIO IN1
USB
AUDIO IN2
AUDIO OUT
IN