Vetter Floating Mount Saddle Bags Owner's Manual And Mounting Instructions page 9

REAR LUGGAGE
RACK STRUT
Mount luggage rack to
forward luggage rack strut
Positioning the parts as shown,
bolt them together with the
supplied 2-6mm x 30mm lock
bolts and 2-6mm flat washers.
NOTE: Installation of the
Floating Mount Hardware on
this particular model motor-
cycle does restrict access to
areas underneath the seat. To
obtain access, the forward
luggage rack strut must be
unbolted from the side loops.
Therefore it is suggested that
you carry your motorcycle's
tool kit in one of the saddle
bags.
Mount the forward luggage
rack strut to the side loops
Using the supplied 2-8mm x
16mm bolts and 2-8mm lock
nuts, secure the forward
luggage rack strut to the
side loop.
9