Trouble Shooting - 1 Source S1-THEC11NS Owner's Manual

Non-programmable digital thermostat
Table of Contents

Advertisement

OWNER'S MANUAL

Trouble Shooting

SYMPTOM: The slide switches on the thermostat
are very difficult to move.
CAUSE: The backplate of the thermostat is
screwed too tightly into a wall that is not
perfectly flat.
REMEDY: Loosen the screws holding the
thermostat into the wall.
SYMPTOM: The Air Conditioning does not
attempt to turn on.
CAUSE: The cooling setpoint is set too
high, the Mode Switch is not set for
Cool, or the batteries are too weak.
REMEDY: Consult the Normal Operation
section in this manual to:
Lower the cooling setpoint (Page 6).
Correct the Mode Switch position
(Page 6).
Replace the batteries (Page 10).
SYMPTOM: The fan does not turn on even though
the compressor has energized.
CAUSE: The Fan Switch is not completely in the
On or Auto position.
REMEDY: Slide the Fan Switch firmly into the On
or Auto position.
S1-THEC11NS
Page 23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents