Quick Start - iHome IP49 User Manual

iP49 Quick start
1: Open unit
To open the iP49, grasp the front lid
of the unit and gently pull upwards
and release into lid rest.
To close, pull lid upwards and gently
press bottom edge towards rear
hinge.
Use this insert
For this iPhone/iPod
NOTE: If you do not have an insert for your iPhone/iPod, please visit www.ihomeaudio.com or call iHome toll free
at 1-877-446-6301 to purchase one.
4: Time
preset
iPhone iPod radio
2: Connect to AC power
RESET
RESET
TEST T
ST E
Attach AC adaptor cable to the DC
jack on back of the iP49 and plug the
other end into a working wall socket
to play and charge iPhone/iPod and
to charge the internal battery.
iPhone 3G
Insert 15
iPhone 3G/3GS
• To use time sync: dock your iPhone/iPod and press the
• To set time manually: move the DST switch on rear of unit to -1 or +1
(subtracts or adds an hour for standard time or daylight saving time).
• Press & hold the
Press the
• Press the
Press the
aux
wake-to
• Press the
Press the
• Press the
Press the
• Press the
iPod touch 2G
insert 16
iPod Touch 2G
Button. The unit will sync to the time on your iPhone/iPod.
Button until the hour display flashes.
/ buttons to set the current hour.
Button. The minute display flashes.
/ buttons to set the current minutes.
Button. The year flashes.
/ buttons to set the current year.
Button. The date flashes.
/ buttons to set the current date and day.
Button to confirm settings.
1
3: Dock iPhone/iPod
Select the proper insert for your
iPhone or iPod from the table below
and place in dock. Gently place
iPhone/iPod into dock (iPhone/iPod
must not be in a "skin" or case).
iPhone/iPod will charge
docked. Press the Button on the
iP49 to play your iPhone/iPod.
iPod nano 5G
insert 18
iPod nano 5G
while