Yaesu VX-6E Operating Manual page 101

Set Mode Item 47 PSWD
Function: Programs and activates the Password feature.
See page 76 for details.
Set Mode Item 48 PTT.DLY
Function: Select the time delay between when the PTT switch is pressed and the carrier is
transmitted.
Available Values: OFF/20MS/50MS/100MS/200MS
Default: OFF
Set Mode Item 49 RESUME
Function: Selects the Scan Resume mode.
Available Values: 3SEC/5SEC/10SEC/BUSY/HOLD
Default: 5SEC
3SEC/5SEC/10SEC: The scanner will hold for the selected resume time, then resume
BUSY:
HOLD:
Set Mode Item 50 RF SQL
Function: Adjusts the RF Squelch threshold level.
Available Values: OFF/S1/S2/S3/S4/S5/S6/S7/S8/S9/S9+
Default: OFF
Set Mode Item 51 RPT
Function: Sets the Repeater Shift Direction.
Available Values: –RPT/+RPT/SIMP
Default: Depends on the transceiver version, as well as the setting of Set Mode Item 4:
ARS.
Set Mode Item 52 RX MD
Function: Selects the receiving mode.
Available Values: AUTO/N-FM/AM/W-FM
Default: AUTO (Mode automatically changes according to operating frequency)
Set Mode Item 53 RXSAVE
Function: Selects the Receive-mode Battery Saver interval ("sleep" ratio)
Available Values: 200 MS(1:1)/300 MS(1:1.5)/500 MS(1:2.5)/1 S(1:5)/2 S(1:10)/OFF
Default: 200 MS
VX-6R/E O
PERATING
whether or not the other station is still transmitting.
The scanner will hold until the signal disappears, then will resume
when the carrier drops.
The scanner will stop when a signal is received, and will not restart.
M
ANUAL
S M
ET ENU
M
ODE
99