JVC MX-KB2 Service Manual page 2

Amplifier Output Power
Input Sensitivity/Impedance (1 kHz) AUX IN: 500 mV/51 kΩ
Speaker terminals
Phones
Cassette Deck Section Frequency Response
Type l (NORMAL)
Wow And Flutter
CD Player CD Capacity
Dynamic Range
Signal-To-Noise Ratio
Wow And Flutter
Tuner FM Tuner
AM Tuner
Unit Dimensions
Mass
Speaker Specifications Type
SP-MXKB2 (each unit)
Speaker Unit
Power Handling Capacity
Impedance
Frequency Range
Sound pressure level
Dimensions
Power Specifications Power Requirements
Power Consumption
Design and specifications are subject to change without notice.
1-2 (No.MB335)
SPECIFICATION
30 W per channel, min. RMS, driven into 6 Ω at 1kHz, with no more
than 10% total harmonic distortion (IEC 268-3)
6 - 16 Ω
32 Ω - 1 kΩ
20 mW/ch output into 32 Ω
63 Hz - 12 500 Hz
0.15% (WRMS)
3 CDs
85 dB
85 dB
Unmeasurable
87.5 - 108.0 MHz
530 kHz - 1710 kHz (at AM10 kHz channel space)
531 kHz - 1710 kHz (at AM9 kHz channel space)
276 mm × 315 mm × 456 mm (W/H/D)
Approx. 8 kg
2-way bass-reflex type
Woofer: 13 cm cone × 1
Tweeter: 5 cm cone × 1
30 W
6 Ω
65 Hz - 20,000 Hz
86 dB/W·m
208 mm × 323 mm × 264 mm (W/H/D)
AC 110/127/220/230-240V, adjustable with voltage selector, 50/60 Hz
83 W (power on mode) 13 W (in Standby mode)