Table of Contents
Advertisement
C u s t o m i z i n g S e t t i n g s U s i n g t h e M I D
Six groups of settings can be programmed using the MID*: Adaptive Cruise Control
(ACC) Setup (if equipped), Meter Setup, Position Setup, Keyless Access Setup (if
equipped), Lighting Setup, and Door/Window Setup.
M o d i f y i n g t h e A u t o D o o r U n l o c k S e t t i n g
As the default setting, only the driver's door unlocks when you shift to Park.
Follow the steps below to set all doors to unlock when you shift to Park:
1. Select "CHG SETTING."
2. Select "DOOR/WINDOW
SETUP."
3. Select "AUTO DOOR
UNLOCK."
* See Customized Settings in your owner's manual for other programmable settings.
8
Press the Info button to toggle to
the "Keyless Memory Settings"
display, then press SEL/RESET to
activate the menu.
SEL/RESET
button
Info
button
4. Select "SHIFT TO P."
5. Select "ALL DOORS."
6. Once the setting has been
saved, select "EXIT."
K E Y L E S S M E M O R Y S E T T I N G S
Each remote (labeled 1 or 2 on the back) activates its own set of programmable
audio, climate, driving position memory, and customized settings (MID).
C h e c k p o i n t
1. Verify that you are using the correct remote by turning the vehicle on.
2. Check the MID:
• If you have the correct remote, the driver ID that first appears on
the MID will match the ID number on the back of your remote.
Go to step 3.
• If the numbers do not match, follow these simple instructions:
- Turn the vehicle off.
- Press the unlock button on your remote.
- Turn the vehicle on again and check the MID. The driver ID that
first appears on the MID should now match the number on the
back of your remote.
3. Once you have the correct remote, you can begin to program your
Keyless Memory Settings.
Tech model shown
9
Advertisement
Table of Contents
