Table of Contents
Advertisement
COLLISION MITIGATION BRAKING SYSTEM (CMBS)
Alerts you to the possibility of a front-end collision and helps reduce the severity of the
collision if you are unable to avoid it.
3 S t a g e s o f C M B S *
Stage 1
Stage 2
Senses a quickly
Provides further
approaching object
warning by lightly
and prompts you to
retracting the seatbelt
take preventive action
and applying light
by flashing a "BRAKE"
brake force.
warning on the MID
and emitting a series of
beeps.
* Depending on the circumstances, CMBS may not go through all of the alert stages before initiating the last stage.
T u r n i n g C M B S O f f / O n
CMBS can be turned off/on by pressing and holding the CMBS OFF button
on the dashboard.
CMBS On
You hear a beep and the
CMBS indicator turns off.
36
(Advance Package)
Stage 3
Applies stronger brake
force and seatbelt
retraction to prepare
the driver and front
passenger for impact.
= Brake Force
= Brake Force
CMBS Off
You hear a beep, a message
appears on the MID, and the CMBS
indicator turns on.
CMBS OFF
BLIND SPOT INFORMATION SYSTEM (BSI)
Assists you in determining if there are vehicles in your blind spot areas.
H o w I t W o r k s
A radar sensor on each corner of the rear bumper alerts you to a detected
vehicle in your blind spot.
Passing and Passed
Lane Change
Minimum operating speed: 6-7mph
When a vehicle is detected in
your blind spot, the blind spot
indicator turns on and stays lit
until the area is clear.
When your turn signal is on and a
vehicle is detected, the blind
spot indicator blinks until the area
is clear or the turn signal is off.
T u r n i n g B S I O f f / O n
(Advance Package)
Merging
Conflict
Press the BSI OFF
button on the
dashboard to
turn BSI off or on.
A message
briefly appears
OFF
ON
on the MID
screen showing
the system status.
37
Advertisement
Table of Contents
