Installing the battery pack
To install a battery pack, follow the steps as detailed below:
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.
1. Insert the battery pack as far as it will go into the computer (1).
2. Ensure that the battery pack is securely in place and the battery lock (2)
is in its (
1
2
1. Battery pack
3. Turn your computer over.
User's Manual
) position.
1
2
Figure 6-2 Securing the battery pack
Power and Power-Up Modes
2. Battery lock
6-11