Removing The Internal Modem - Toshiba 2010 User Manual

User's Manual
9. Connect the modem cable.
10. Install the modem on the back of the Touch Pad and secure it with two screws.
11. Seat the bottom cover, install the keyboard and secure 15 screws.
12. Insert the HDD pack into the slot.
13. Secure the HDD pack cover with two screws.
14. Install the Battery Pack.

Removing the internal modem

To remove the internal modem.
1. Save your data, quit Windows and turn off the power.
2. Disconnect the AC Adaptor and any other peripheral devices.
3. Turn the computer upside down and remove the Battery Pack.
4. Remove two screws securing the HDD pack cover and remove the HDD pack.
5. Remove 15 screws (one screw has a rubber cover). Do not remove the screws
securing the memory module cover.
6. Turn the computer upside and remove the keyboard brace. Remove two
screws securing the keyboard.
7. Remove the keyboard and remove four screws.
8. Turn the computer upside down and remove the bottom cover. You can check
the PPT label at this point.
9. Remove two screws securing the modem and remove it.
10. Disconnect the modem cable.
11. Seat the bottom cover, install the keyboard and secure 15 screws.
12. Insert the HDD pack into the slot.
13. Secure the HDD pack cover with two screws.
14. Install the Battery Pack.
The internal modem is approved by Japan Approvals Institute for Telecommunica-
tions Equipment.
H-2
A00-0940JP