D-Link DSL-2740B User Manual page 26

Section 3 - Configuration
STEP 3: Using the Setup Wizard - For Bridge Mode
connections
Please enter the appropriate information below as provided by your ISP.
Select Bridge as protocol from drop-down menu.
Enter the VPI/VCI numbers if provided by the ISP.
Click Next to go to the next Setup Wizard window.
STEP 4: Using the Setup Wizard - For Wireless LAN
Settings
Click the Enable Wireless checkbox to allow the router to operate in the
wireless environment.
The SSID identifies members of the Service Set. Accept the default name
or change it to something else. If the default SSID is changed, all other
devices on the wireless network must use the same SSID.
Set security Mode, select this option if your wireless adapters support
Click Next to go to the next window and complete the Setup Wizard.
D-Link DSL-2740B User Manual 26