Step #1: Unpacking The Cooktop; Step #2: Check The Electrical Supply Requirements - Denali Plus CTR1 Installation And Operating Instructions Manual

Step #1 - Unpacking the Cooktop
Carefully unpack the cooktop from its shipping container. If possible, retain the original shipping carton and
protective packaging in the event the unit ever has to be returned for service. Verify and identify the
package contents. The following items should be included in the carton. If any components are missing or
damaged, call DENALI+ customer service immediately.
 Radiant Electric Cooktop
 Mounting brackets (2 pcs. for Single and Double Burners, 4 pcs. for Triple Burners)
 Mounting screws (2 pcs. for Single and Double Burners, 4 pcs. for Triple Burners)
Step #2 - Check the Electrical Supply Requirements
This product must be installed in accordance with national, state and local electric codes. The following
table provides the correct voltage, amperage and frequency that must be supplied to the cooktop.
DENALI +
Model #
CTR1120 _ _ _
CTR2120 _ _ _
CTR2240 _ _ _
CTR3240 _ _ _
The supply must be from an individual grounded circuit that is protected by a circuit breaker and rated per the
specifications for the various models as shown in the table above.
AND NATIONAL ELECTRICAL CODES.
Failure to comply with the applicable codes may result in fire, property damage,
personal injury or death.
If the electric power supply does not meet the product specifications, consult
with a licensed electrician before proceeding with installation.
Fig. 1
Maximum Connected
Load (Watts)
1,200
2,400
2,400
3,600
INSTALLATIONS MUST COMPLY WITH ALL LOCAL, STATE
Power Supply
Requirements
120V/ 10A/ 60Hz
120V/ 20A/ 60Hz
240V/ 10A/ 60Hz
240V/ 15A/ 60Hz
Minimum Wire
Size (AWG)
16 Ga.
16 Ga.
16 Ga.
16 Ga.