Reposition Input Power Cord; Figure 5 Reposition Input Power Cord - Liebert MPH-NBV27NXXH30 User Manual

2.3

Reposition Input Power Cord

The Liebert MPH is shipped from the factory with the input power cord entering from the end of the
unit. The cord can be repositioned 90° if it will need to enter from the front. To reposition the cord:
1. Remove the four screws retaining the input power plate.
2. Reposition 90° so that power cord enters from front.
3. Reinstall the screws and tighten them.
Figure 5 Reposition input power cord
Input Power
Plate Screws
7
Installation in Knurr Rack—Vertical, Zero-U Mount
Input Power Plate
Repositioned for Different
Cable Angle