iHome IB1 User Manual

Model: iB1
Stereo Headphones with
In-line Volume Control
Using Your iHome Headphones
The earpieces are marked "L" and "R". Place the "L" earpiece in
your left ear and the "R" earpiece in your right ear for proper fit and
best sound. If the earpieces are inserted incorrectly they will not fit
properly in your ears and the sound quality will not be satisfactory.
Connect the headphone plug to the headphone jack of your music
player. Be sure that the plug is fully inserted into the jack. If the plug
is not fully inserted you may only hear sound from one earpiece.
To protect your hearing, always start listening with the In-Line
Volume Control set to a low level and gradually increase the volume
to a comfortable listening level.
Note: You may have to adjust the volume control on your music
player as well as the In-Line Volume Control on your headphones to
find the most satisfactory sound level. If one control is set too low
and the other is set too high, the sound may be distorted. Try
setting the volume control on your music player halfway between
the Min and Max settings, and then use the In-Line Volume Control
on your iHome headphones to make final adjustments.
IMPORTANT! Listening at high volume for long periods of time can
result in long-term hearing damage. For your safety, do not use
headphones if they would prevent you from hearing warning
sounds, such as while driving a car or motorcycle, riding a bike, etc.
NOTE: In extremely cold or dry air conditions you may notice a
slight 'tingling' feeling in your ears when using in-ear headphones.
This is the result of the build-up of static electricity in your body.
This is normal and not an indication of any problem with your
headphones.