activecare medical Spitfire 1310 Owner's Manual page 20

For service assistance, please call your authorized ActiveCare dealer.
Table 2: Scooter Controller Internal Diagnostics
Flash Possible Cause
code
1 The battery needs charging or
there is a bad connection to the
battery.
2 There is a bad connection to the
motor.
3 The motor has a short circuit to a
battery connection.
4 Not available
5 Not available
6 The controller is being inhibited
from driving.
7 A speed control lever fault is
indication.
8 A controller fault is indicated.
9 The parking brake has a bad
connection.
10 Excessive voltage has been
applied to the controller.
19
Solution
Check the connections to the
battery. If the connections are
good, try charging the battery.
Check all connections between
the motor and the controller.
Please contact your Authorized
Service Center.
Check the battery charger
connector.
Remove the battery charger from
the scooter.
Make sure that the speed control
lever is in the rest position before
switching on the scooter.
Make sure that all connections
are secure.
Check the parking brake and
motor connections. Make sure
the controller connections are
secure.
Check the battery connections.
This is usually caused by a poor
battery connection.
Spitfire 1310/1410 Owner's Manual