Advertisement
Installation & Operation
Before installing the device:
1. Please read the User Manual before installation.
2. Use high performance VGA & Audio cables.
3. Please turn off power for all the sources and display devices.
Installing SP-VS102A / SP-VS104A / SP-VS108A:
1. Connect VGA & Audio cable to your VGA source and VGA Splitter Input.
2. Connect VGA & Audio cables to your VGA Splitter Outputs and Displays.
3. After connecting all the cables, please plug in the power supply.
LED light will turn ON to indicate power status. **Notes: With sufficient power from
graphic card, our VGA Self-Powered Splitter Series can operate @1080p without
needing power supply**
4. Please turn on the source and display devices. The Built-In EDID function will detect
the supporting resolution of the display connected to Port #1 as priority.
3
Advertisement
