Menu/Exit; Navigation; Select/Play/Pause; Vol+/Vol-/Field Entry Selection - PLAYNETICS Al-Mu’allim AM-RD2 User Manual

Table of Contents

PLAYNETICS™

PLAYNETICS

6.2 Menu/Exit (Part ID - 1)

To display a menu or sub-menu, press button (1). This button is also used to exit or close

an application (with exceptions to Qur'an and Islamic Library applications – see

application part for more details).

6.3 Navigation (Part ID - 4 & 5)

When a menu is displayed, press either button (4) to go up or button (5) to go down. For

screens which require field input or screen navigation, these buttons can be used to toggle

(previous or next) between each entry fields or screen accordingly.

6.4 Select/Play/Pause (Part ID - 6)

To select an item from the menu or to accept/commit an entry press button (6) once. On

certain applications which play audio, this button can also be used to either play or pause

the audio i.e. Qur'an application and Islamic Library application.

6.5 Vol+/Vol-/Field Entry Selection (Part ID – 2 & 3)

For applications which play audio, these buttons are used for volume control – press

button (2) to increase the volume and button (3) to decrease. For applications which

require user input (for example setting the date), pressing button (2) or (3) will toggle

between the input values within the focused field. These buttons also have special uses in

certain applications – see application part for more details.

The device has a high performance built-in rechargeable battery which will require

charging depending on the frequency of usage (high usage of audio playing applications

will require charging more often than others). Keep the device charged to an acceptable

level after excessive usage.

To charge the device; (use the charging cable provided) connect the cable ends (should fit

each ports) to the DC adapter port and the charging port of the device (Part ID - 8). Then

plug the DC adapter to the main power supply accordingly. [Alternatively, you can use the

cable connected to a PC with USB port and charge without DC adapter].

To insure that you get better performance from the battery, please make sure you have the

power saver options set accordingly (see settings application).

We recommend that you set the power saver – standby time to 5 minutes. This means that

if there device is inactive for this period (main screen), it will automatically switch off.

Note: Try not to charge the device unless the power is very low. Excessive charging can

harm the battery life span and also affect the performance (long term).

When the device is very low on battery power, then a "battery low" message will display

on the screen and the device will switch off automatically.

Al-Mu'allim AM-RD2 Users Guide

Page:

Table of Contents