Recite Speed; Stop Playing; Repeat - PLAYNETICS Al-Mu’allim AM-RD2 User Manual

PLAYNETICS™ PLAYNETICS
PLAYNETICS PLAYNETICS
Note: As discussed on section 10.1.2, the same result can be achieved by pause/stopping
the playback and using the buttons (Part ID – 2 & 3) to toggle between all the translation
languages and then continue the playback.

10.1.3.3 Recite Speed

The speed of recitation is can be controlled easily using this option. When the submenu is
displayed, select the RECITE SPEED option by pressing the select button (Part ID – 6).
There are a total of 17 speed control values which can be selected according to your
requirement. Please refer to the guidelines (sections 6.4 and 6.5) in order to increase or
decrease the speed of recitation.
Value Description
0 Normal – Recommended
-1 to -8 Slow - Very Slow
1-8 Fast - Very Fast
To achieve the best result in audio recitation, we recommend that the audio recitation level
be set to 0.

10.1.3.4 Stop Playing

This option allows you to EXIT the playing mode and go back to the chapter selection
menu where you can select another chapter. When the submenu is displayed, select the
RECITE SPEED option by pressing the select button (Part ID – 6).
Note: You can also pause/stop the audio anytime and press the menu button (Part ID – 1)
to EXIT the playing mode. However, this does not take you back to the chapter selection
menu; instead it goes to the Qur'an applications main menu list.

10.2 Repeat

This option allows the continuous playback (repetition) of verses you select for a given
chapter – useful for memorising. Please follow the steps bellow:
Step 1: Input the chapter number (use the guidelines on section 6.5).
Step 2: Press the navigation buttons (Part ID – 4) to enter the next parts.
Step 3: Input the verse to start from and the verse to end (again using the guidelines on
section 6.5) and then press the select button (Part ID – 6).
Copyright © 2006 Playnetics Ltd (UK). All Rights Reserved.
Al-Mu'allim AM-RD2 Users Guide
15
Page: