Yamaha GX-505 Service Manual page 12

GX-505/GX-505VCD
7. Removal of Tray & Traverse Unit
a. Remove 2 screws ( !1 ) and then remove the Clamper Bracket in Fig. 10.
b. Remove 1 screw ( !2 ) and then remove the Lever Switch in Fig. 10.
c. Disconnect the Flat Connecting Cable ( 9P ) in Fig. 10.
d. Push the Friction Arm ( the bottom side of the CD Mechanical Unit ) with a screwdriver or the like and pull out the Tray
forward as in Fig. 10.
e. Unhook 1 Tray hook in Fig. 11 and pull out the Tray.
f. Remove 4 screws ( !3 and !4 ) in Fig. 12.
g. Disconnect the Flat Connecting Cable ( 16P ) and connectors ( 6P ).
h. Take out the Traverse Unit with the Slider Cam and the TU Holder in Fig. 12.
i. Remove 2 screws ( !5 ) and then remove the TU Holder in Fig. 12.
Lever Switch
(OPEN/CLOSE)
!1
!2
Friction
Arm
11
CN3(9P)
Clamp Bracket
!1
Fig. 10
16P
!5
Hook
Tray
!4
!3
Slider Cam
Fig. 11
Traverse Unit
6P
!5
TU Holder
Fig. 12