Toshiba 23L1350UC User Manual page 110

110
Troubleshooting
General troubleshooting
Noisy picture.
If you are watching an analog channel (off-air broadcast or Cable
TV), you can set the DNR feature to reduce visible interference in
the TV picture, see
Video Input Selection problems
If the Input Selection window does not appear when you press
INPUT on the remote control or TV, press INPUT a second time.
This will cause a change to the next video input source and display
the Input Selection window.
Poor display color or no color.
The station may be having broadcast dificulties. Try another
channel.
Adjust the Tint and/or Color, see
page 74
Poor composite picture.
If the TV is connected to an external A/V device (e.g. DVD player,
video game system, set-top box, etc.) try using a ColorStream
HDMI
TM
Picture and sound are out of sync.
As with all products that contain a digital display, this may occur in
rare instances, when viewing certain content (e.g. television
broadcasts, video games, DVDs). The cause may include, without
limitation, video processing within the TV, video processing in an
attached gaming system, and video processing or different
compression rates used by broadcasters in their programming.
Try the following:
If the TV is connected to an A/V receiver that has a
v
programmable audio delay feature, use this feature to help
synchronize the sound to the picture.
If the problem occurs only on certain TV channels, inform your
v
local broadcast, cable, or satellite provider.
Digital audio settings may not be correct. Check the
v
connections, see
Turn off and unplug the TV from the AC wall outlet for a few
v
seconds and plug it back in.
"DNR" on page 107
video connection instead.
"Connecting a digital audio system" on page 34
"Adjusting the picture quality" on
or
®