Screensaver (For Preventing Image Retention) - Panasonic TH-85PB1W Operating Instructions Display Operations

Screensaver
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
1
Select "Screensaver" in "Setup" menu and press
Function selection
2
Mode selection
3
Start setting
4
(For preventing image retention)
Press to select Function.
Press to select the desired function.
Negative image
White screen Overlay scrolling bar
Negative image : Negative image will be displayed on the screen.
Scrolling bar only : A white bar will scroll from left to right. The image won't be displayed.
Overlay scrolling bar : The brightness of the image will be decreased and a white bar will scroll
on it.
White screen : The whole screen will be white.
Press to select Mode.
Press to select each
mode items.
When the Mode is set to On, press to select Start.
Press to start Screensaver.
The menu screen will disappear and the Screensaver will be activated. To stop the
Screensaver under On, press the R button or any buttons on the main unit.
Note: When the display is turned off, the Scrensaver will be deactivated.
button.
Scrolling bar only
Off
Interval : Operates when Periodic Time and Operating
Time are setup and those times arrive.
Time Designation : Operates when Start Time and Finish Time
are setup and those times arrive.
Standby after SCR Saver : Operates while Screensaver duration, and
display enters standby mode.
On : Operates when Start is selected and the
ACTION ( ) button is pressed.
Screensaver
Time 99:99
Start
Scrolling bar only
Function
Mode Off
35