Table of Contents
Advertisement
Using Auto Area Code
This feature prepends an area code to all outbound calls.
When enabled, the designated prefix is always added before
your dialed numbers.
1. From the Home screen, tap
and then tap Call settings ➔ Additional
2. Press
settings.
3. In a single motion, drag the slider to the right of the Auto
area code field to turn it on
4. Tap Auto area code, enter a new prefix, and then tap OK.
Fixed Dialing Numbers
Fixed Dial Number (FDN), allows you to restrict outgoing calls
to a limited set of phone numbers.
Enabling FDN
1. From the Home screen, tap
2. Press
and then tap Call settings ➔ Additional
settings ➔ Fixed Dialing Numbers.
3. Tap Enable FDN.
4. At the prompt, enter your PIN2 code and tap OK.
212
(Phone).
.
(Phone).
Important! Not all SIM cards use a PIN2 code. If your SIM card
does not, this menu does not display.
The PIN2 code is provided by your carrier. Entering
an incorrect PIN2 code three times will cause the
phone to lock. Contact customer service for
assistance.
Changing the PIN2 Code
1. From the Home screen, tap
2. Press
and then tap Call settings ➔ Additional
settings ➔ Fixed Dialing Numbers.
3. Tap Change P N2.
4. At the prompt, enter your old PIN2 code.
5. At the prompt, enter a new PIN2 code.
6. Confirm your PIN2 code.
Important! Not all SIM cards use a PIN2 code. If your SIM card
does not, this menu does not display.
The PIN2 code is provided by your carrier. Entering
the PIN2 incorrectly three times will cause the
device to lock. Contact customer service for
assistance.
(Phone).
Advertisement
Table of Contents
