Table of Contents
Advertisement
Note: Your device visibility is based on the time set within the
Visible timeout field (2 Minutes, 5 Minutes, 1 Hour, or
Never). This value appears as a countdown within this
Visibility timeout field.
To scan for Bluetooth devices:
1. Verify Bluetooth is active.
2. At the bottom of the Bluetooth settings page, tap Scan to
search for visible external Bluetooth-compatible devices
such as headsets, devices, printers, and computers.
To review your Bluetooth received files:
1. Verify Bluetooth is active.
2. From the Bluetooth settings page, press
tap Received files.
186
Pairing Bluetooth Devices
The Bluetooth pairing process allows you to establish trusted
connections between your device and another Bluetooth
device. When you pair devices, they share a passkey, allowing
for fast, secure connections while bypassing the discovery and
authentication process.
Note: Pairing between two Bluetooth devices is a one-time
process. Once pairing is established the devices continue
to recognize their partnership and exchange information
without entering a passcode.
To pair your device with another Bluetooth device:
1. Verify Bluetooth is active.
and then
2. From the Bluetooth settings page, tap the selection box
at the right side of the device name to add a checkmark
and turn visibility on.
Your device must be visible to successfully pair with an
external device. This is shown by a green check mark.
3. Tap Scan. Your device displays a list of discovered in-
range Bluetooth devices.
4. Tap a device from the list to initiate pairing.
Advertisement
Table of Contents
