1. Accessories When you open the box, please check the content first. Besides the DTB-131EU receiver box, there are other accessories shown below. Power Adapter (12VDC/A) x 1 Remote Control (with battery) x 1 Option User’s Manual x 1 ANT-101 Antenna x 1...
3. Cable Connection This receiver box provides TV and VCR SCART with CVBS and RGB video output for TV and VCR. There is one ANT IN to receive RF signal from the air and forward it to ANT OUT for VCR or TV RF input.
Page 6
Antenna When power on, box will go to standby mode. You can use the or the remote " POWER" key on the top cover to start the operation. An "WELCOME PAGE" will guide you to setup the box by selecting proper OSD language, region and scan channel if this is the 1st time boot up.
4. Remote Control POWER Power On or Stand by TV/RADIO Select TV or Radio programs Display Favorite Group Display Channel List LIST Turn on OSD main menu or exit current menu MENU Display EPG table Move highlight to up or channel up Move highlight to down or channel down Move highlight to left or turn down volume Move highlight to right or turn up volume...
5. OSD Menu Operation The OSD menu provides an easy interface for you to operate the box via the included remote. Press [ MENU ] key to enter main menu like the figure at left. There are four groups of sub- menu: Channel, Installation, Setup and Tools.
5.1 Channel TV Channel List Show all channels with preview window. Use the " LEFT/ RIGHT" key to show chan- nels in the same frequency. ■Favorite Set Favorite channel to group 1~8. ■Move Move a channel to another position. ■Find Search channel name by characters.
Channel Setup Show the channel parameters and search channel by PID information. Aerial adjustment This page can help to adjust aerial for a best position and direction to get the best signal quality. Different beep tones to indicate After input password, it can be tuned signal power by beep tone;...
5.3 Setup OSD Language OSD Language and preferred Audio Language settings. TV System ■Display Mode To select output TV video format (NTSC, PAL). ■Aspect Ratio To switch video aspect ration among 4:3LB, 4:3PS, and 16:9. ■Video Output Select Video output format. ■LCN Mode If LCN function is supported at your area, you can turn on this selection.
Region and Time User may select the time zone (Region) and GMT Mode (Include Offset/Date/Time), it also supports summer time (D.S.T.). If you want to see the instant time on screen, turn on the "Time display" selection. Timer Setting ■Program Timer This is a reservation function;...
5.4 Tools Information Shows program info. (channel NO, Modulation, frequency…) Game You can select a game you want here. Load Factory Default Reset to defaults and delete all channels. (Should input default password "0000" first.)
Software Upgrade Software upgrade will be done by technician only. Welcome PAGE ■OSD Language OSD Language and Audio Language settings. ■Region This should select the area you stay, the scan frequency will base on this setting. ■Auto Scan Delete all channels and do the full scan. ■Main Menu Return to Main Menu.
6. Hot Keys Teletext, Subtitle and EPG (Electronic Programming Guide) features can be displayed via remote. 6.1 Teletext Press remote " TEXT" will enable and display Teletext page. 6.2 Subtitle Press remote " SUB" to enable subtitle information.
Page 18
6.3 EPG Use the " EPG" key from remote to display EPG (Electronic Programming Guide). Through the EPG, you can know present and future programs and their introduction. This menu shows present and next program. Schedule Press " 1" from previous EPG menu will list scheduled programs of the selected channel.
Need help?
Do you have a question about the DTB-131 EU and is the answer not in the manual?
Questions and answers