Safety Precautions; Preset Modes - Toshiba TekBright PA3553 Series User Manual

■
■

Safety Precautions

Never place the monitor or any other heavy object on the power cord.
Doing so may damage the cord or result in fire or electric shock, possibly
resulting in serious injury.
Do not expose the monitor to rain, excessive moisture or dust which could
cause fire or electric shock, possibly resulting in unit damage or serious
injury.
Do not cover the slots or openings of the monitor in order to allow proper
heat dissipation. Always place the monitor in a location where there is
sufficient space around it to ensure adequate ventilation.
Avoid placing the monitor against a bright background or where sunlight or
other light sources may reflect on the face of the monitor. Place the monitor
just below eye level.
Handle your monitor with care when transporting it.
Do not press, push or scratch the monitor screen to avoid damaging it.

Preset modes

Your monitor has default setting modes that are most commonly used (see
the table below). For optimum adjustment, perform the Auto Setup under
Windows "Full Screen" pattern. The monitor is capable of storing up to 9
user modes. The only condition to store as a user mode is the new display
information must have 1 KHz difference for horizontal frequency or 1 Hz for
vertical frequency or the sync signal polarities are different from the default
modes.
For locations using 120V AC, use a UL listed cord set, Type SVT
wire and plug rated 10A/125V.
For locations using 220/240V AC (outside of U.S.), use a cord set
consisting of H05VV-F cord and plug rated 10 A, 250 V.
User's Manual
9