Replacing The Tail/Brake Light Bulb - Yamaha FZ6RA Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Do not touch the glass part of the bulb.
1. Remove cowlings A and C. (See
page 7-9.)
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
7
2
1. Headlight bulb cover
2. Headlight coupler
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
2
1. Headlight bulb holder
2. Headlight bulb
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
1
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the cowlings.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
Replacing the tail/brake light
bulb
1. Remove the passenger seat. (See
1
2. Remove the owner's tool kit.
3. Remove the tail/brake light bulb
1. Tail/brake light bulb socket
4. Remove the burnt-out bulb by pull-
7-37
page 4-14.)
socket (together with the bulb) by
turning it counterclockwise.
1
ing it out.
EAU47401