MTN FastLink MF667 Quick User Manual

Introduction
MTN F@stLink MF667 HSPA USB Stick
The MTN F@stLink USB Stick is a multi-mode USB modem, working in HSUPA/HSPA+/WCDMA/
EDGE/GPRS/GSM networks. With USB interface connecting to a laptop or a desktop PC, it
Quick User Guide
integrates the functionality of a modem and a mobile phone (SMS), and combines mobile
communication with Internet perfectly. It supports data and SMS services through the mobile
phone network, enabling you to communicate anytime and anywhere.
Specification
The following table shows the specification of your device.
Interface Type
Systems supported
Operating systems supported
Network Standards
SMS service, Data service, Applications management,
Functions
support microSD card, etc.
Transmission speed (Max) HSUPA: 5.76Mbps UL
Temperature Storage: -20°C ~ +70°C
Dimension 88.5mm × 27.2mm × 10.5mm
microSD capability Support up to 32GB microSD card
USB 2.0 HIGH SPEED Notes: microSD is a trademark
of SD Card Association.
Supports most types of laptop and desktop PC.
Getting to know your device
Windows XP(32bit), Windows Vista(32bit/64bit), Windows 7
The following figure shows the appearance
(32bit/64bit), Windows 8(32bit/64bit) MAC 10.5,10.6,10.7,10.8
of the MF667. It is only for your reference.
Ubuntu(32bit) 12.10 12.04 11.10, Fedora(32bit) 18 17 16
The actual product may be different.
HSUPA/HSPA+/WCDMA/EDGE/GPRS/GSM
Hardware Installation
1. Press and push the front cover and remove it.
HSPA+: 21.6Mbps DL
Operation:-10°C ~ +60°C
Notes:
Do not open the front cover rudely so as to avoid the damage of the front cover.
2. Insert the SIM/USIM card into the SIM/USIM card slot.
Insert the SIM/USIM card with the metal contact area facing downwards into the slot, and then
push SIM/USIM card as far as possible, shown as the following picture.
1. USB Connector
2. SIM/USIM card slot
3. Indicator
4. microSD card slot
5. Front Cover
6. Stick Cap
3. Insert the microSD card into the microSD card slot.
Notes:This stick only supports microSD card.
Insert your microSD card into the microSD card slot, shown as the follow-
ing picture.
4. Put the front cover flatly upon the body of modem and push the front cover
to lock the cover in its place.
5. Connect the Stick to your laptop or desktop PC.
Plug the USB connector into your computer's USB port and make sure that
it is tightly inserted.
The OS automatically detects and recognizes
new hardware and starts the installation wizard.