MTN MF190 Quick User Manual

Introduction
MTN MF190 USB Modem
The ZTE USB modem is a multi-mode USB modem, working in HSUPA/HSDPA/WCDMA/EDGE/
GPRS/GSM networks. With USB interface connecting to a laptop or a desktop PC, it integrates
Quick User Guide
the functionality of a modem and a mobile phone (SMS), and combines mobile communication
with Internet perfectly. It supports data and SMS services through the mobile phone network,
enabling you to communicate anytime and anywhere.
Specification
The following table shows the specification of your device.
Interface Type USB 2.0 HIGH SPEED
Systems supported Supports most types of laptop and desktop PC.
Operating systems supported Windows XP, Vista, Windows 7
SMS service, Data service, Applications management,
Functions
support microSD card, etc.
Network Standards HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM
Transmission speed (Max) HSUPA: 5.76Mbps UL HSDPA: 7.2Mbps DL
Temperature Storage: -40°C ~ +80°C Operation:-10°C ~ +60°C
Dimension 76mm × 26mm × 11mm(without cap)
Weight About 21g
microSD capability Support up to 32GB microSD card
Notes: microSD is a trademark
1. Indicator
of SD Card Association.
2. Front Cover
Getting to know your device
3. Modem Cap
MAC 10.4, 10.5, 10.6
The following figure shows the appearance 4. SIM/USIM card slot
of the MF190. It is only for your reference. 5. microSD card slot
The actual product may be different. 6. USB Connector
Hardware Installation 3. Insert the microSD card into the microSD card slot.
1. Put finger on the bottom finger grip, and then lift the front cover of Notes:This modem only supports microSD card.
the modem to release and remove.
Insert your microSD card into the microSD card slot, shown as the follow-
ing picture.
4. Put the front cover of the modem flatly upon the body of modem. Direct
Notes:
the front cover towards the locking catches on the sides of the modem
Do not open the front cover rudely so as to avoid the damage of the front cover.
and push the front cover of the modem to lock the front cover into its
2. Insert the SIM/USIM card into the SIM/USIM card slot.
place.
Insert the SIM/USIM card with the metal contact area facing downwards into the slot, and then
5. Connect the Modem to your laptop or desktop PC.
push SIM/USIM card as far as possible, shown as the following picture.
Plug the USB connector into your computer's
USB port and make sure that it is tightly
inserted.
The OS automatically detects and recognizes
new hardware and starts the installation wizard.