Auto Setup - LG RH698H Owner's Manual

Auto setup

When the first time to turn on the unit, the initial setup
wizard sets the language, clock and channels
automatically.
1 Turn on the unit:
The initial setup wizard appears on the screen.
2 Choose a language:
3 Select the chosen language:
4 Check the antenna and go to the next step:
5 Choose a clock setting mode:
6 Select the chosen clock setting mode:
7 Set the clock:
This step is not available for Auto mode
8 Choose a country you are using the unit:
9 Choose a broadcasting type:
All or Analog
10 Select the [Start] and starts channel scan:
11 Close the initial setup:
Auto setup - more you can do
Adjust the programmed channels
Press HOME, then use b b B B to select [Easy Menu] option. Press ENTER while
[SETUP] is selected. The SETUP menu appears on the screen. Select the
[Program Edit] on the second level options then press B B to move to the third
level. Press ENTER while [Edit] option is selected. The channel editing screen
appears on the screen.
Select which channel you would like to edit and press ENTER. An option menu
on the left side of the screen will be highlighted.
ON REMOTE
POWER
v v V V [Favorite] Set the program to favorite channel.
[Delete]: Delete the selected channel from programmed channel list.
ENTER
[Move] (Analog channel only): Change the order of the channels and which
ENTER
numerical button they correspond to.
v v V V
[Block] Blocks the program.
[Station Rename] (Analog channel only): change a name of the selected
ENTER
channel.
v v V V b b B B ,
[Program Edit] (Analog channel only): Change the settings of a channel
ENTER
manually.
v v V V
Editing a channel (Analog channel only)
B B v v V V
You can change the settings of programmed channel by selecting
[Program Edit] option on the left side of the channel editing screen.
B B ENTER
ENTER
[PR]: Indicates the selected channel position.
[Seek]: Searches for a channel automatically. Searching stops when the unit
tunes in a channel.
[Ch.] Changes the channel number.
[MFT] Fine tunes the channel to obtain a clearer picture.
[CANAL]: Sets the channels for the decoder. You need this setting to watch
or record PAY-TV/Canal plus programs.
[NICAM]: Sets the channels for the NICAM broadcast.
[OK]: Confirm the settings and return to the channel list menu.
15