Auto Setup - LG RHT299H Owner's Manual

Connecting to the AV IN 3 Jacks
Connect the input jacks (AV IN 3) on the recorder to
the audio/video out jacks on your accessory
component, using audio/video cables.
Jack panel of Accessory Component
(VCR, Camcorder, etc.)
AUDIO
OUTPUT
VIDEO
OUTPUT
Connecting a Digital Camcorder
Using the front panel DV IN jack, it is possible to
connect a DV digital camcorder and digitally transfer
DV tapes to DVD.
Use a DV cable (not supplied) to connect the DV
in/out jack of your DV camcorder to the front panel DV
IN jack of this recorder.
Notes:
This jack is for connection to DV digital camcorder
only. It is not compatible with digital satellite tuners
or D-VHS video decks.
Disconnecting the DV cable while recording a
contents of the connected digital camcorder may
result in malfunction.
DV Digital Camcorder
DV
IN/OUT
Front of the recorder
16
R
L
Front of the recorder

Auto Setup

After the POWER is pressed for the first time to turn
on the unit or resetting the unit, the Initial Setup
Wizard function sets the language, clock and tuner
channels automatically.
1. Select a language for the Setup menu and on-
screen display. Use v / V to select a language
then press ENTER.
2. Please check your antenna connections.
Press ENTER to move next step.
3. Use v / V to select the Clock Set option then
press ENTER.
[Auto]: When Channel auto search is completed
the actual Time and Date are also set
automatically. (See "Auto Clock Set" on page 20.)
[Manual]: Enter the necessary information for
date and time.
b / B (left/right): Moves the cursor to the
previous or next column.
v / V (up/down): Changes the setting at the
current cursor position.
Press ENTER to confirm your setting.
4. Use v / V to select a country and press B button
then press ENTER while [Start] option is selected.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner's memory.
You can skip the analog channel scanning by
pressing B.
5. Press ENTER to finish the setup.