Advertisement
Quick Links
Owner's Manual & Assembly Instructions
AZ01
Model No.
709831110
Storage Area: 54 Sq. Ft.
5,0 m
BUILDING DIMENSIONS
*Approx.
Base
Size
Size
10' x 6'
121" x 68 3/4"
3,0 m x 1,7 m
307,3 cm x 174,6 cm
EN106
697. 68206-A
Missing Parts, Questions on Assembly?
Call: 1-800-851-1085
Do not return to dealer, they are not
equipped to handle your requests.
294 Cu. Ft.
8,3 m
2
3
* Size rounded off to the nearest foot
Exterior Dimensions
(Roof Edge to Roof Edge)
Width
Depth
123 1/4"
71 1/4"
313,1 cm
181,0 cm
NW106
CAUTION: SOME PARTS HAVE SHARP EDGES. CARE
MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES
TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ
SAFETY INFORMATION PROVIDED IN THIS MANUAL
BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES
WHEN HANDLING METAL PARTS.
Interior Dimensions
(Wall to Wall)
Height
Width
70 7/8"
118 1/4"
180,0 cm
300,4 cm
Depth
Height
Width
66"
69 5/8"
55 1/2"
167,6 cm 176,8 cm
141,0 cm
Door
Opening
Height
58"
147,3 cm
Advertisement
Related Manuals for Arrow EN106
Summary of Contents for Arrow EN106
- Page 1 Owner's Manual & Assembly Instructions AZ01 Model No. EN106 NW106 697. 68206-A Missing Parts, Questions on Assembly? Call: 1-800-851-1085 Do not return to dealer, they are not equipped to handle your requests. 709831110 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES Storage Area: 54 Sq.
- Page 2 BEFORE YOU BEGIN..Owner's Manual Before beginning construction, check local building codes regarding footings, location and other requirements. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Instructions are supplied in this manual and contain all Assembly Instructions: appropriate information for your building model.
-
Page 3: Tools And Materials
PLAN AHEAD..Be sure the day you select to install your building is dry and calm. Watch the Weather: Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Whenever possible, two or more people should work together to assemble Teamwork: your building. - Page 4 SAFETY FIRST..Safety precautions are important to follow throughout the construction of your building. •Care must be taken when handling various •Practice caution with the tools being used in the pieces of your building since some contain assembly of this building. Be familiar with the sharp edges.
- Page 5 CARE & MAINTENANCE..A5 Web For long lasting finish, periodically clean and wax the exterior surface. Touch- Finish: up scratches as soon as you notice them on your unit. Immediately clean the area with a wire brush; wash it and apply touch-up paint per manufacturer's recommendation. Keep roof clear of leaves and snow with long handled, soft-bristled broom.
- Page 6 ACCESSORIES..A6 WEB ROOF STRENGTHENING FLOOR FRAME KITS (heavy snow load) KITS Extra roof beams and gable braces designed for added protection against heavy snow accumulation. Increases the strength of your roof by 50%. ANCHOR KITS MODELS FB47410, FB5465, FB106-A Model No.
- Page 7 THIS PAGE LEFT BLANK INTENTIONALLY...
- Page 8 THIS PAGE LEFT BLANK INTENTIONALLY...
- Page 9 Base The Base For Your Building OPTION 1: ARROW FLOOR FRAME KIT: (Order No. FB106-A or 68381-A) Arrow has the best base for your building in this simple kit. It keeps stored items above the ground. This kit should be used with one of the following: A.
- Page 10 Anchoring Anchoring Down The Building It is important that the entire floor frame be anchored after the building is erected. Below are recommended ways of anchoring. Anchoring into Wood/Post: (Model No. AK4 or 60298) Arrow Anchoring Kit: Use 1/4" (6 mm) Wood Screws. There are 1/4" (6 mm) Recommended for use with any suggested base.
- Page 11 Hardware Remove from bag of screws and save for the last step 65900A #10Bx1/2" (13 mm) 65923 65004 Black Screw (8) #8-32x3/8" (10 mm) 65103 #8Ax5/16" (8 mm) (Packed with Screws) Bolt (107) Screw (290) #8-32 Hex Nut (107) 65109 67468 66646 66045...
-
Page 12: Parts List
Parts List AZ12 Assembly Part Part Quantity Check Key No. Number Description in Carton List 5986 Rear Wall Angle 6403 Door Track Splice 10497 Horizontal Door Brace 6635 Gable Brace 6529 Roof Panel 6000 Right Gable 6001 Left Gable 3719 Door Handle Brace 8461 Ridge Cap... - Page 13 Assembly by Key No.
- Page 14 ● ● ● ● ● 8934 Ramp (1) ● Parts Needed For ● Step 1 ● ● ● ● ● 9367 Front Floor Frame (2) Floor Frame Assemblies ● ● ● ● ● 8936 Rear Floor Frame (2) The front floor frame is made up of three pieces.
-
Page 15: Frame Assemblies
● Parts Needed For ● ● ● ● ● ● 5986 Rear Wall Angle (2) Step 2 ● ● ● ● ● 9917 Rear Wall Channel (2) Frame Assemblies Rear Wall Channel 9917 The main frame pieces reinforce the 118 1/8" 300,0 cm 9917 walls. - Page 16 ● Parts Needed For ● ● ● ● ● ● 8474 Roof Beam (1) Step 3 ● ● ● ● ● 8476 Side Wall Angle (1) Roof Beam Assembly The roof beams join the two gables and support the roof panels. The main roof beam is made up of two pieces fastened together.
-
Page 17: End View
● Parts Needed For ● ● ● ● ● ● 6403 Door Track Splice (1) Step 4 ● ● ● ● ● 9366 Door Track (2) Door Track Assembly NOTE: Door Track Splice (painted part) The door track assembly supports the sliding doors and reinforces the front wall. - Page 18 ● ● ● ● ● Front Floor Assembly (1) ● Parts Needed For ● Step 5 ● ● ● ● ● 8946 Side Floor Frame (2) Floor Frame ● ● ● ● ● Rear Floor Assembly (1) RIGHT REAR Assemble the four corners of the 8946 floor frame using two screws at each corner as shown.
-
Page 19: Top View
● Parts Needed For ● ● ● ● ● ● 8995 Wall Panel (2) Step 6 ● ● ● ● ● 9372 Front Wall Panel (2) Corners ● ● ● ● ● 9362 Corner Panel (4) AZ19 NOTE The remainder of the building assembly Narrow requires many hours and more than one Side... - Page 20 ● ● ● ● ● Door Track Assembly (1) ● ● ● ● ● Rear Wall Angle Assembly (1) ● Parts Needed For ● Step 7 ● ● ● ● ● 8476 Side Wall Angle (2) Frames ● ● ● ● ● Rear Wall Channel Assembly (1) ●...
- Page 21 ● Parts Needed For ● Step 8 ● ● ● ● ● 8995 Wall Panel (6) Wall Panels AZ21 Each wall panel has a crimped rib on STEP one side. The crimped rib should go 8995 8995 under the rib of the panel that follows 8995 8995 Locate all of the wall panels and...
- Page 22 ● Parts Needed For ● ● ● ● ● ● 9900 Door Jamb (2) Step 9 ● ● ● ● ● 9365 Front Wall Channel (2) Front Channel/Door Jamb The door jambs reinforce the door opening and provide an attractive 9365 trim.
- Page 23 ● Parts Needed For ● ● ● ● ● ● 6000 Right Gable (2) Step 10 ● ● ● ● ● 6001 Left Gable (2) Gable Assemblies ● ● ● ● ● 5971 Roof Beam Bracket (4) The gables go on top of the front and rear walls to support the roof beams.
- Page 24 ● ● ● ● ● Left Gable Assemblies (2) ● Parts Needed For ● Step 11 ● ● ● ● ● Right Gable Assemblies (2) Gables/Braces ● ● ● ● ● 6635 Gable Brace (2) Lift and fasten a right and left gable, under angle at corner, to the door track and rear wall angle with screws.
- Page 25 ● Parts Needed For ● ● ● ● ● ● Main Roof Beam (1) Step 12 ● ● ● ● ● 8474 Roof Beam (2) Roof Beams Fasten the main roof beam to the gable brace of the front gable. STEP Fasten the other end of the main roof beam to the gable brace of the...
- Page 26 ● Parts Needed For ● Step 13 ● ● ● ● ● 8468 Right Roof Panel (1) Right Roof Panel STEP Installing the roof panels is best done with a step ladder. Begin installing roof panels at the back right corner of 8468 8469 the building.
- Page 27 ● Parts Needed For ● ● ● ● ● ● 8469 Left Roof Panel (2) Step 14 ● ● ● ● ● 6529 Roof Panel (4) Roof Assembly ● ● ● ● ● 8468 Right Roof Panel (1) STEP STEP 8469 Left Roof Panel Weather Stripping Tape Roll...
- Page 28 ● Parts Needed For ● Step 15 ● ● ● ● ● 8461 Ridge Cap (1) Ridge Cap Install the ridge cap on the com- pleted roof section using bolts and nuts. Do not fasten the ends of the ridge cap at this time. Fasten the lower end of the panels to the side wall angles using screws and washers.
- Page 29 ● Parts Needed For ● Step 16 ● ● ● ● ● 8482 Side Roof Trim (2) Roof Trim Attach the side roof trim to the lower end of the roof panels on each side of the building using screws at each panel overlap.
-
Page 30: Door Assembly
● ● ● ● ● 3719 Door Handle Brace (2) ● Parts Needed For ● ● ● ● ● ● 10489 Right and Left Doors (2) Step 17 Door Assembly ● ● ● ● ● 10497 Horizontal Door Brace (4) ●... - Page 31 ● Parts Needed For ● ● ● ● ● ● Right Door Assembly (1) Step 18 ● ● ● ● ● Left Door Assembly (1) Door Installation & Adjustment Horizontal Door Brace Gable Door Track Door Slide From inside the building, put the bottom of the right door assembly (on your left when you are inside the building) behind door jamb into the...
- Page 32 EN106 NW106 697.68206-A AZ32 Anchoring and Floor Frame Anchoring Anchor your building at this time. Floor Frame If you have purchased a Floor Frame Kit you need to install it at this time. SOME FACTS ABOUT RUST 1. Avoid nicking or scraping the coating surface, Rusting is a natural oxidizing process that occurs inside and out.