3-D Tones - Nokia N95 User Manual

Tip: To switch between the general and silent
profiles in the standby mode, press and hold
#.
To modify a profile, scroll to the profile, and select
Options > Customize. Scroll to the setting you
want to change, and press the scroll key to open the
choices. Tones stored in the mass memory of your
device are indicated with
In the tones list, select
service) to open a list of bookmarks. You can select
a bookmark and start connection to a web page to
download more tones.
If you want the caller's name to be spoken when
your device rings, select
and set Say caller's name
must be saved in Contacts.
To create a new profile, select
new.

3-D tones

Press , select Tools
With 3-D tones, you can enable three-dimensional
sound effects for ringing tones. Not all ringing tones
support 3-D effects.
96
.
Download sounds (network
Options > Customize,
to On. The caller's name
Options Create
>
Utilities 3-D tones.
> >
To enable the 3-D effects, select
effects > On. To change the ringing tone, select
Ringing tone and the desired ringing tone.
To change the 3-D effect that is applied to the
ringing tone, select Sound trajectory
desired effect.
To modify the effect, select from the following
settings:
Trajectory speed — Scroll left or right to adjust
●
the speed at which sound moves from one
direction to another. This setting is not available
for all ringing tones.
Reverberation — Select the type of echo.
●
Doppler effect — Select
●
tone sound louder when you are closer to your
device, and softer when you are farther away.
When you get closer to the device, the ringing
tone appears to become louder, and softer when
you move away from it. This setting is not
available for all ringing tones.
To listen to the ringing tone with the 3-D effect,
select Options Play tone. If you enable the 3-D
>
tones but do not select any 3-D effect, stereo
widening is applied to the ringing tone.
To adjust the ringing tone volume, select
Profiles Options Customize
> >
volume.
3-D ringing tone
and the
On to have the ringing
Tools
>
Ringing
>