Laser Pegs 670-1570 COMBO Manual

Please read this manual before
670-1570 COMBO
you begin! Failure to follow
this manual's instructions may
For Boys And Girls
result in damage to the Triangle
Power Base, AC Adapter and/
Ages 5 And Up
or Laser Pegs®. Not following
6 Bonus Models+
these instructions will void the
Any creation you can build manufacturer's warranty. The
packaging must be kept
LIGHTED
because it contains important
information.
CONSTRUCTION SET INCLUDES:
WARNING:
CHOKING HAZARD
• 40 Laser Pegs®
• Triangle Power Base
Not for children under 3 yrs.
• Instruction Manual Do not submerge in water.
Requires 3-AA Batteries
Batteries NOT
Included

Construction Compatible

Compatible with other
construction kits
EN71, RoHS COMPLIANT
This product complies to
all safety requirements
of ASTM F 963
x5 Laser Pegs® Parts List
90°
There is No LED In The Peg
Y PEG
x2
x3
x10
x6
x2
SQUARE 90°PEG STRAIGHT SQUARE
45°PEG
PEG T-PEG M-M PEG
Each Laser Peg® is color coded on the circuit
Color
board inside each shape. There is No LED In The
Code
90 Degree Peg.
Laser Pegs Stackable
®
A Laser Pegs ® link that
Triangle Power Base
allows you to connect to
Requires (3-AA) Batteries
other construction kits.
www.LaserPegs.com
This manual is copyright and cannot be reproduced or used online
without Laser Pegs®Ventures LLC permission. Copyright 2013 © All
Rights Reserved US Patent #7,731,558 Additional Global & Multiple
Patents Pending. Laser Pegs®Ventures LLC. 8304 Consumer Ct
Sarasota FL. 34240. Contact: Support@LaserPegs.com

Connecting Pegs

To construct with Laser Pegs®, slide two pieces together to form a connection.
Slide each piece on and off smoothly.
Press button to
Add 3-AA Batteries
turn on/off
Push Power Button to cycle
through 3 different
light settings.
Peg Holes
Power
3-AA Batteries
Button
-
Small parts.
AC Adapter Connection
Remove LR-44 Batteries
The LR-44 batteries are only for the
Remove the three (3)
"Try-Me" function, they should be
Phillips head screws with a
removed from the Triangle Power
4mm screw driver.
Base and replaced with 3-AA batter-
ies before giving it to the child.

Replacing Batteries

1. Remove the three (3) screws.
2. Place three (3) AA batteries in the correct position - as displayed inside
the Triangle Power Base. (Batteries are to be inserted with the correct
polarity.)
3. Reassemble the Triangle Power Base and replace the three (3) screws.
4. Push the RED Power Button to turn on!
5. Do not mix old and new batteries.
6. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium, NiMH) batteries!
7. Exhausted batteries are to be removed from the Triangle Power Base.
8. Never connect more than 200 Laser Pegs®
x2
9. Non-rechargeable batteries are not to be recharged.
STACKABLE
10. Rechargeable batteries are only to be recharged under adult
supervision.
11. Rechargeable batteries are to be removed from the Triangle Power
x10
Base before being recharged.
12. The supply terminals are not to be short-circuited.
Using an
Remove all batteries from Laser Pegs® Triangle
AC Adapter
Power Base before using the 5-volt AC Adapter.
WHEEL
PEG
When using an AC Adapter,
NEVER place the Adapter
plug into the Triangle Power
Base's top peg holes.
*To avoid short-circuits, keep metal objects and other unauthorized
materials from obstructing the peg holes.
The AC Adapter and the Triangle Power Base are to be regularly examined
for damage to the cord, plug, enclosure and other parts, and in the event of
such damage, they must not be used until the damage has been repaired.
Never connect more than 200 Laser Pegs® when using a 5-volt (2000mA)
AC Adapter.
WARNING! Each Laser Peg® draws current from the batteries. Therefore,
the more pegs you use, the quicker you will deplete your battery power! As
the power weakens, the current will slowly fail and some Laser Pegs® will
illuminate (typically the reds and yellows) and some won't. When the Laser
Pegs® dim, the Laser Pegs® are not broken, they just need stronger batteries
or an AC Adapter.
You have 3 simple options...
1. Use a 5-volt AC Adapter –available from www.LaserPegs.com.
2. Change the batteries.
3. Use high quality batteries. They will last a little longer, but they will still
deplete rapidly the more Laser Pegs® you connect!
CROP PLAN - Also known as a
"Crop Duster", is a light weight
aircraft equipped for spraying in-
secticides and fungicides on fields.
STEP
1
STEP
2
STEP
3
STEP
4
ATTACH MODEL TO THE
TRIANGLE POWER BASE
EXPLORER BOT - NASA's Robonaut
2 will be the first dexterous
humanoid robot to explore into
space.