Ten-Tec 1253 Assembly And Instruction Manual page 37

5-27. Mount the bandswitch board on the front of the
subpanel as explained_in Step 5-26. Again, remember that a
"final" tightening is NOT done at this time.
5-28. Solder the 3" RED wire from "X" on the main board
(steps 4-4, 4-5) to "X" on the bandswitch board.
5-29. Prepare a 3" length of BLACK wire. solder one end to
"Y" on the main board and-the other end to "Y" on the band-
switch board.
5-30. Double-check all work done in steps 5-1 to 5-29.
Chart 6.1: T-KIT Model 1253 Receiver
Bandswitching Quick-Reference Chart
Band Coil-Value
1 L1-68 μH
2 L2-33 μH
3 L3-12 μH
4 L4-8.2 μH
5 L5-4.7 μH
6 L6-3.3 μH
7 L7-2.2 μH
8 L8- 1.5 μH
9 L9-1.2 μH
* or silver
Color Code
blue-gray-black-gold
orange-orange-black-gold
brown-red-black-gold
gray-red-gold-gold
yellow-violet-gold-gold
orange-orange-gold-gold
red-red-gold-gold
brown-green-gold-gold
brown-red-gold-gold *
1253 - 35
Wire
Length
5.25"
5.50"
5.75"
6.00"
6.25"
5.50"
5.75"
6.00"
6.25"