Table of Contents
Advertisement
Additional Information
Important Safety Instructions
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury,
including the following:
1.
Read and understand all instructions.
Follow all warnings and instructions marked on the product.
.
Unplug this product from the wall outlet before cleaning. Do not use
3.
liquid or aerosol cleaners. Use a damp cloth for cleaning.
Do not use this product near water.
4.
Do not place this product on an unstable table, shelf, stand or other
.
unstable surfaces.
Slots and openings in the back or bottom of the telephone base and
.
handset are provided for ventilation. To protect them from overheating,
these openings must not be blocked by placing the product on a soft
surface such as a bed, sofa or rug. This product should never be placed
near or over a radiator or heat register. This product should not be
placed in any area where proper ventilation is not provided.
This product should be operated only from the type of power source
.
indicated on the marking label. If you are not sure of the type of power
supply in your home, consult your dealer or local power company.
Do not allow anything to rest on the power cord. Do not install this
.
product where the cord may be walked on.
Never push objects of any kind into this product through the slots in the
.
telephone base or handset because they may touch dangerous voltage
points or create a short circuit. Never spill liquid of any kind on the
product.
To reduce the risk of electric shock, do not disassemble this product,
10.
but take it to an authorized service facility. Opening or removing
parts of the telephone base or handset other than specified access
doors may expose you to dangerous voltages or other risks.
Incorrect reassembling can cause electric shock when the product is
subsequently used.
11.
Do not overload wall outlets and extension cords.
Unplug this product from the wall outlet and refer servicing to an
1.
authorized service facility under the following conditions:
•
When the power supply cord or plug is damaged or frayed.
10
Advertisement
Table of Contents
