Setting The Logo - Odys Mpix5 User Manual

2
Select the "Date&Time" item in the menu and press OK to
confirm.
3
Now change the time setting. Select
the setting required using the control
buttons
the value using the
buttons.
Press OK to confirm the values
after you have finished making the
settings.
Note
The date and time can only be displayed by the camera in
playback mode. They cannot be printed.
The time settings are saved by an internal backup battery.
Therefore, the time settings are not lost when Li battery is
removed. The settings are not lost until the internal backup battery
is flat.

13. Setting the LOGO

The LOGO is the startup image which is shown on the display when the
camera is activated. This allows the user to define individual images.
To do so, proceed as follows:
1
Press the
photo Press the menu button and select the "Set Logo" item.
2
After setting the logo, select the option "Play Logo" in the
playback mode menu. There are two options:
• Activate: The image selected by the user is used as the startup
image.
30
and , and then change
and
button to start playback mode. Open the required
control