Setting The Logo - Odys Slim X6 User Manual

2
Select the "Date&Time" item in the menu and press OK to
confirm.
3
Now change the time setting.
Select the setting required using
the control buttons
and then change the value using
the and
Press OK to confirm the values
after you have finished making
the settings.
The date and time can only be displayed by the camera in
playback mode. They cannot be printed.
The time settings are saved by an internal backup battery.
Therefore, the time settings are not lost when the two
replaceable AAA batteries are removed. The settings are not
lost until the internal backup battery is flat.

5.14 Setting the LOGO

The LOGO is the startup image which is shown on the display when
the camera is activated. This allows the user to define individual
images. To do so, proceed as follows:
1
Press the
required photo Press the menu button and select the "Set
Logo" item.
2
After setting the logo, select the option "Play Logo" in the
playback mode menu. There are two options:
ODYS Slim X6
and ,
control buttons.
button to start playback mode. Open the
29