Advertisement
Vectra VX-11 Cable Diagram
Note: The pulleys on this diagram are numbered
BI-TRI CABLE
to make the installation of new cables as easy
PN 26840
as possible. Simply start threading the cables
through the pulleys beginning with the lowest
CABLE LENGTH
ADJUSTMENT
number and working up. For example, if you are
installing an entire set of cables start at pulley #1.
If you are installing only a new leg press cable
(PN 56980), you would begin at pulley #3.
Note: Where applicable, text and other drawings
in this manual that mention or show pulleys
contain corresponding numbers.
LEG PRESS CABLE
PN 56980
Large Hole Plug
Small Hole Plug
1/4-20 x 3/4
3/8-16 x 3/4
1/2-13 x 1
3/8-16 x 3
PN 57080
PN 27990
Hex Bolt
Hex Bolt
Button Head
Hex Bolt
PN 20850
PN 55860
PN 13790
PN 29190
Advertisement
