HP Pavilion dv6500 Maintenance And Service Manual page 90

4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Switch cover (see
d.
Keyboard (see
e.
Speaker assembly (see
f.
Display assembly (see
g.
Top cover (see
h.
Audio board (see
i.
USB/power connector board (see
j.
System board (see
Remove the fan/heat sink assembly:
1.
Turn the system board upside down with the expansion port 3 and external monitor port toward you.
2.
Disconnect the fan cable (1) from the system board.
3.
Loosen the three Phillips PM2.5×5.0 screws (2) and the Phillips PM2.5×4.0 screw (3) that secure
the fan/heat sink assembly to the system board.
4.
Remove the fan/heat sink assembly (4).
NOTE:
fan/heat sink assembly and system board components, it may be necessary to move the fan/heat
sink assembly from side to side to detach the assembly.
Chapter 4 Removal and replacement procedures
82
Battery on page
Hard drive on page
Optical drive on page
Switch cover on page
Keyboard on page
Speaker assembly on page
Display assembly on page
Top cover on page
Audio board on page
System board on page
Due to the adhesive quality of the thermal paste and thermal pads located between the
41).
46)
54)
56)
60)
58)
63)
69)
80)
USB/power connector board on page
77)
76)