Transmission - Honda 2000 Prelude Owner's Manual

Main Menu Table of Contents
Transmissio n Fluid
5-speed Manual Transmission
Correct
level
Maintenance
Check the fluid level with the
transmission at normal operating
temperature and the car sitting on
level ground. Remove the
FILLER
transmission filler bolt and carefully
BOLT
feel inside the bolt hole with your
finger. The fluid level should be up
to the edge of the bolt hole. If it is
not, add Genuine Honda Manual
Transmission Fluid (MTF) until it
starts to run out of the hole. Reinstall
the filler bolt and tighten it securely.
If Honda MTF is not available, you
may use an API service SG, SH or SJ
grade motor oil with a viscosity of
SAE 10W-30 or 10W-40 as a
temporary replacement. An SG
grade is preferred, but an SH or SJ
grade may be used if SG is not
available. However, motor oil does
not contain the proper additives and
continued use can cause stiffer
shifting. Replace as soon as
convenient.
The transmission should be drained
and refilled with new fluid according
to the time and distance recommen-
dations in the maintenance schedule.