Honda 2007 Accord Coupe Owner's Manual page 138

Main Menu
Main Menu
Dolby noise reduction comes on
when you insert a tape. The
indicator in the display also
comes on. If the tape was not
recorded in Dolby, turn it off by
pressing the preset 4 (NR) side of
the preset bar. Dolby remains off
until you press the preset bar again.
Dolby noise reduction is manufactured under
license from Dolby Laboratories Licensing
Corporation. ''DOLBY'' and the double-D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
To Stop Playing a Tape
To remove the tape, press the eject
button on the tape player. If you
want to turn the player off, press the
AUDIO PWR knob or turn off the
ignition. The tape will remain in the
drive. When you turn the system
back on, the tape will be in pause
mode. Press the preset 3
PROG) side of the preset bar.
Table of Contents Table of Contents
To switch to the AM/FM radio or
CD player while a tape is playing,
press the AM/FM or CD/AUX
button. To change back to the tape
player, push the CD/AUX button.
Tape Search Functions
FF/REW
push the preset
preset bar. You will see REW in the
display. To fast forward the tape,
push the preset
preset bar. You will see FF displayed.
Press the preset 1, 2, or
bars to take the system out of rewind
or fast forward.
(PLAY/
To rewind the tape,
1 (REW) side of the
2 (FF) side of the
3 side of the
AM/FM/CD Player
Press the side to find
SKIP
the beginning of the current song or
passage. Press the side to find
the beginning of the next song or
passage. When the system reaches
the beginning of a song or passage, it
begins to play it.
REPEAT Press the RPT button
to continuously play a song or
passage. You will see RPT displayed.
The track will repeat until you press
the RPT button again.
The skip and repeat
NOTE:
functions use silent periods on the
tape to find the end of a song or
passage. These features may not
work if there is almost no gap
between selections, a high noise
level, or a silent period in the middle
of a selection.
135