Table of Contents
Advertisement
Main Menu
Main Menu
Heating and A/C
Ventilation
The flow-through ventilation system
draws in outside air, circulates it
through the interior, then exhausts it
through vents near the rear window.
1.
Set the
temperature to the lower
limit.
2.
Make
sure the A/C is off.
3.
Select
and fresh air mode.
4.
Set the
fan to the desired speed.
110
Table of Contents
Table of Contents
Using the Heater
The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system.
1.
Select
.
When you select
automatically switches to the fresh
air
mode.
2.
Set
the fan to the desired speed.
3.
Adjust the warmth of the air with
the
temperature control dial.
Using the A/C
Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
64
). If it moves near the red zone,
turn off the A/C until the gauge
reading returns to normal.
, the system
1.
Turn on the A/C by pressing the
button. The indicator above the
button comes on when a fan speed
is selected.
2.
Make sure the temperature is set
to maximum cool.
3.
Select
4. If the outside air is humid, select
recirculation mode. If the outside
air is dry, select fresh air mode.
5.
Set the fan to the desired speed.
.
Advertisement
Chapters
Table of Contents
