DRIVING POSITION MEMORY SYSTEM (DPMS)
Store driver's seat and outside mirror positions into memory for each corresponding
keyless remote transmitter (1 or 2).
How It Works
1. Turn on the vehicle. Make sure the
shift lever is in Park (P).
2. Adjust the seat and outside mirrors
to your preferred position.
Note: Once set, stored positions can be recalled by pressing one of the memory
buttons (1 or 2) on the door.
ONE-TOUCH TURN SIGNAL
Use this quick and convenient method to signal a lane change.
How It Works
• Lightly push the turn signal lever up
or down for a three-blink sequence.
• For a continuous signal, push the
lever up or down until it locks into
place.
10
Available on EX-L.
3. Press SET. You will hear a beep.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using within 5
seconds. You will hear two beeps.
REVERSE TILT DOOR MIRRORS
When you shift into Reverse (R), you can tilt either outside door mirror down slightly
to improve your view as you parallel park. Shifting out of Reverse returns the tilted
Available on EX-L.
mirror to its original position.
How It Works
• To tilt the driver's door
mirror, move the mirror
selector switch to the
left (L) position.
• To tilt the passenger's
door mirror, move the
mirror selector switch
to the right (R)
position.
• To turn the feature off,
move the switch to the
middle position.
11