Electronic Vehicle Information Center (Evic); Display Messages; Operation - Chrysler 1500 Owner's Manual

Wheel Alignment Mode
Before performing a wheel alignment this mode must be
enabled. Refer to "Electronic Vehicle Information Center
(EVIC)" in "Understanding Your Instrument Panel" for
further information.
NOTE: This mode is intended to be enabled with engine
running.
Protection Mode
In order to "protect" the air suspension system, the vehicle
will enter Protection Mode when load leveling cannot be
achieved. Some driving may be required to clear the pro-
tection mode telltale in the EVIC. Refer to "Electronic
Vehicle Information Center (EVIC)" in "Understanding
Your Instrument Panel" for further information.
NOTE: If equipped with a touch screen radio all
enabling/disabling of air suspension features must be
done through the radio. Refer to "Uconnect® Access
Settings" in "Understanding Your Instrument Panel" for
further information.

Electronic Vehicle Information Center (EVIC)

Display Messages

When the appropriate conditions exist, a message will
appear in the EVIC display. Refer to "Electronic Vehicle
Information Center (EVIC)" in "Understanding Your
Instrument Panel" for further information.
An audible chime will be heard whenever a system error
has been detected.

Operation

The indicator lamps 3 through 6 will illuminate to show
the current position of the vehicle. Flashing indicator
lamps will show a position which the system is working
to achieve. When raising, if multiple indicator lamps are
flashing, the highest flashing indicator lamp is the posi-
tion the system is working to achieve. When lowering, if
STARTING AND OPERATING 441
5