Advertisement
UNPACKING
• Open the shipping boxes and remove the top layer of foam.
• Remove the owner's manual and other accessories from the packing box.
• Grasp the underside of the amplifier and lift it straight out of the packing box.
(2 People Needed)
• Place the amplifier in a safe location. Remove the protective plastic wrapping.
• After unpacking the CA-608, inspect it for any shipping damage and contact
us immediately if any is found. Do not plug the power supply into any outlet if
you find any shipping damage.
• Please keep all packing materials for future transport of your player. Shipping
the CA-608 in anything other than its original boxes may result in damage that
is not covered by warranty.
ACCESSORIES
The following items are included in the package aside from the main unit:
• Owner's manual
• Warranty card
• AC power cord
INSTALLATION
• Place the CA-608 in a rack or on a shelf.
• Turn off any associated components prior to connecting the CA-608. This
minimizes the chance of momentary electrical surges disturbing your system.
• Connect the analog audio outputs from all audio source equipment to any of
the four inputs on the back of the CA-608.
• Connect the loudspeaker cables to the loudspeaker binding posts on the back
of the CA-608. Use only the binding post (4 or 8 ohms) that matches the
impedance of the loudspeaker.
• Be sure to connect the polarity of the speaker cables correctly. Match the
positive (red) and negative (white) binding posts to the corresponding speaker
connections.
• With the power switch in the OFF position, attach the power cord to the
CA-608 and connect it to your AC outlet.
• Turn on the main power switch. The CA-608 will take approximately 60
seconds to initialize before it is ready for use.
Advertisement
