Table of Contents
Advertisement
185_38 english manual 15.pdf 17. 4. 2009 8:28:17
TV MENU OPERATION
PICTURE SETTINGS MENU
Adjusting Tint (only available on some
sources)
Lets you increase or decrease the level
of tint within the picture
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight Tint
3) Press [>] to increase the tint
or [<] to decrease the tint
4) Press [EXIT] to exit
Adjusting Sharpness
You can change the sharpness between
the different preset options
Normal
For standard use
Sharp
For pictures with little movement
Sharpest
For pictures with nearly no movement
Soft
For pictures with large amount of movement
Softest
For pictures with lots of movement
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight Sharpness
3) Press [>] to navigate through
the various options
4) Press [EXIT] to exit
Adjusting Colour Temperature (only available
on some sources)
There are 3 presets for colour temperature
Normal
Standard setting
Warm
Increased red within the picture
Cold
Increased blue within the picture
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight Colour Temperature
3) Press [>] to navigate through the
various options
4) Press [EXIT] to exit
Dynamic Noise Reduction
Reduces the interference in the picture.
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight DNR
3) Press [>] to switch between OFF, LOW,
MID & HIGH
4) Press [EXIT] to exit
15
Hide quick links:
Advertisement
Table of Contents
