Setting The Calendar; Setting The Time; Displaying The Calendar/Time - Alpine iDA-X200 Owner's Manual

01CT00iDAX200.book Page 7 Monday, November 19, 2007 11:29 AM

Setting the Calendar

1
Press and hold FUNC./SETUP for at least 2
seconds to activate the SETUP selection mode.
2
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select the
GENERAL mode, and then press
1 2
BT AUDIO GENERAL
* *
BT
1
* Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
2
* Displayed only when an external audio processor is connected. For
details, refer to the Owner's Manual of the external audio processor.
3
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select
CALENDAR ADJ, and then press
4
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to set year.
5
Press /ENTER.
6
Repeat steps 4 and 5 above to set month, day.
7
Press and hold for at least 2 seconds to return to
normal mode.
• Pressing during the procedure will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.

Setting the Time

1
Press and hold FUNC./SETUP for at least 2 seconds
to activate the SETUP selection mode.
2
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select the
GENERAL mode, and then press
1 2
BT AUDIO GENERAL
* *
BT
1
* Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
2
* Displayed only when an external audio processor is connected. For
details, refer to the Owner's Manual of the external audio processor.
3
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select CLK
ADJ, and then press
4
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to set hour.
5
Press /ENTER.
6
Repeat steps 4 and 5 above to set minutes.
7
Press and hold for at least 2 seconds to return to
normal mode.
• Pressing during the procedure will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
01GB05iDAX200.fm
/ENTER.
DISPLAY IPOD
/ENTER.
/ENTER.
DISPLAY IPOD
/ENTER.

Displaying the Calendar/Time

Press VIEW.
The calendar/time is displayed. Pressing VIEW again will return
to normal mode.
0 7 / 1 2 / 3 1
12:00
Controllable With Remote Control
Point the optional remote control transmitter at the remote
control sensor.
Remote control sensor
ALPINE iDA-X200 68-09359Z65-A (EN)
7
-EN